From the information I was able to obtain, the item you selected, MagnaFlow Stainless Steel Catalytic Converter, part # MF23453, will fit your 1997 Chevrolet C/K Series with 5.7 liter motor.
The # MF23453 Catalytic Converter is 49-State legal, and is legal in the state of Virginia. This catalytic converter is not legal in the state of California. view full answer...
The catalytic converter on your 1994 Ford F-350 with the 7.3 V8 diesel engine will be located directly after the downpipe if present. I say if present as it is a fairly common part to remove on these engines because it will free up power. The down pipe is a part of the exhaust system that connects to the turbo exit. Simply follow the turbo exit down under the cab until you find the catalytic converter or catalytic converter delete pipe. Please note that you will need to have access under... view full answer...
The MagnaFlow Ceramic Catalytic Converter part # MF49575 is a direct fit catalytic converter which means it will only fit Ford Explorers and Mercury Mountaineers from 2002 - 2004 with the 4.0L V6 engine. Therefore, the MagnaFlow Ceramic Catalytic Converter will fit six different vehicles. view full answer...
According to Magnaflow, the Stainless Steel Direct-Fit Catalytic Converter, # MF23684, will fit your 1990 Mazda Miata, but it is not CARB (California Air Resource Bureau) compliant. At this time we do not have a catalytic converter for your Miata that is CARB approved.
I have linked you to our series of FAQ articles about Catalytic Converters. view full answer...
There are two catalytic converters that fit a 2002 Lincoln Navigator with 4-wheel drive (so long as it has a 5.4L V8 engine) that we carry:
- MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF93144
- MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF93145
Both converters are direct replacements and will work for an '02 Navigator, but be aware they do require the original hangers and flanges to install. So if those were cut out then you would need to have them... view full answer...
The correct replacement catalytic converter for 1999 Jeep Grand Cherokee with 4.0 I6 is the MagnaFlow Heavy Metal Loaded, Stainless Steel Catalytic Converter part # MF99205HM which is a universal fit or the MagnaFlow Stainless Steel Catalytic Converter part # MF93139 which is a direct fit.
The universal fit will be a much harder install as welding will be required but it will be more cost effective than the custom fit option which is a bolt-on. view full answer...
The correct catalytic converter for your 1999 Toyota Tacoma is going to depend on the engine it has in it. I have listed out the options for you below:
2.4L, Direct Fit = # MF23886
2.4L, California, Direct Fit = # MF23758
2.7L, Direct Fit = # MF23770
3.4L, 2 wheel drive, Direct Fit = # MF23760
Converter # MF91033 is not listed as a fit for your truck. view full answer...
Generally speaking no, the direction of exhaust gases does not matter when passing through a catalytic converter like the MagnaFlow Stainless Steel Catalytic Converter part # MF23882. If the direction of flow does matter then it will be stamped onto the body. view full answer...
I have a great catalytic converter option for you. Based on my research, I confirmed with Magnaflow that the only way to figure out if the MagnaFlow Stainless Steel Catalytic Converter - Universal - California Approved MF33007 will fit your 1997 Ford Ranger 3.0L V6 engine is by providing your EFN (Engine Family Number). If you know that number, feel free to respond to this answer with that information. The tag with that number is commonly found near the radiator shroud under the hood.
However,... view full answer...
The MagnaFlow Stainless Steel Catalytic Converter - Universal, item # MF94007, is actually the correct universal application for the front catalytic converter on your 1992 F-150 Pickup with 4.9 Liter engine. The 1992 F-150 with 4.9L engine requires 2 catalytic converters, unless you do a swap for a system that has a larger catalytic converter to handle the emissions.
The MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit, item # MF93302, is the correct direct fit system for your... view full answer...
The 1976 Toyota Pickup with the 20R engine is a 2.2L engine. For your 1976 Toyota Pickup I recommend the MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit, part # MF23889. It is a direct fit catalytic converter for your truck.
I have included a product description link. view full answer...
The best way to increase power with your 1990 Ford Ranger is by adding a catalytic converter, which is going to be a specific fit for your truck based on the engine it has.
- 2.3L I4 Engine: MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF23376
- 2.9L V6 Engine or 4.0L V6 Engine: MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF23388
The reason a catalytic converter will be the best option to increase the power of your '90 Ranger is because it will improve... view full answer...
I do have a C.A.R.B. compliant catalytic converter for your 1987 Chevrolet El Camino w/ 5.0L engine, but it will not be part # MF39456. You will need the MagnaFlow Ceramic Catalytic Converter - Stainless Steel - Direct Fit - California Approved, part # MF56RP. The C.A.R.B. executive order # is D-193-150.
I have included a product description link below. view full answer...
Good question. The CARB compliant products refer to an environmental protection agency (California Air Resources Board) certification. In California, your catalytic converter will need to be compliant with CARB to pass the state inspections.
The MagnaFlow Ceramic Catalytic Converter - Stainless Steel - Direct Fit # MF49752 is 49 state compliant, but is unfortunately not compliant with California regulations. We do not currently carry any catalytic converters that are CARB compliant,... view full answer...
Although the MagnaFlow Ceramic Catalytic Converter # MF49752 isn't an OEM part for your 2007 Toyota Prius it will work as well, if not better than, the OEM catalytic converter that originally came on your Prius. This part does have the platinum inside that you asked about.
Attached is an installation video of this on a 2007 Prius for you to reference. view full answer...
We carry MagnaFlow catalytic converters to fit your 2004 Nissan Frontier wtih a V6. The correct fit depends whether or not your truck is supercharged.
I've linked our selection. Choose from the drop down menu whether you have the supercharged model or not to find the options that work on your truck. view full answer...
I linked our available aftermarket catalytic converters for each of the two versions of the 1996 Ford Explorer, V8 and V6, so you can see that these two engines require different parts.
The V8 can use parts # MF23311, # MF23312, # MF23310 and # MF99005HM.
The V6 uses either part # MF99006HM or # MF23313. view full answer...
We only offer one option for a catalytic converter that has been confirmed to fit your 1999 Toyota Tacoma 4x4 with the V6 engine and that is part # MF23882. This is a stainless steel, direct-fit catalytic converter that conforms to EPA/federal standards only and is not legal in California.
We do not offer a universal option, ceramic or stainless steel, that has been confirmed to fit your Tacoma. view full answer...
While we do have some direct-fit options for your 1999 Ford Econoline E-350, we do not currently carry any catalytic converters with the O2 port included. Ultimately, in order to confirm if your van requires a port/sensor, I recommend reaching out to directly to the manufacturer. It is always important to consider the manufacturer's guidelines when it comes to the installation of aftermarket parts.
With that being said, we do offer non-O2 port direct-fit catalytic converter options based... view full answer...
Go To Results